How to fix Orange Light on Canon printer?
Many people are familiar with Canon printers due to their effectiveness, reliability, and user-friendly design. However, like any other electronic device, they may occasionally experience glitches. One common issue users face is the appearance of an orange light on the Canon printer. While the specific cause can vary depending on the number of flashes or blinking patterns, this orange light generally indicates an error that requires attention.
In this blog, we will explore the potential causes of the flashing orange light on Canon printers and provide detailed solutions to help you resolve the issue.
Comprehending Orange Light On Canon Printer
A flashing orange light on a Canon printer usually indicates one of the following issues:
- A paper jam
- Problem with the ink cartridge
- Ink levels that are low or empty
- Paper not detected by the printer
- Failure to position the print head
- Being too hot
- Hardware issue
Count the number of times the Canon printer’s orange light flashes in a cycle to identify the specific issue. In Canon printers, the blinking patterns correspond to certain error codes. Once you’ve identified the cause, you can proceed with the appropriate solution.
1. Resolving Paper Jam Problems
One of the most common causes of an orange blinking light is a paper jam. Here’s how to fix it:
How to Get Rid of Paper Jam
- Unplug the printer from the power source and turn it off.
- Open the paper tray or the printer cover.
- Carefully remove any paper stuck inside the printer. Check the printer’s interior rollers as well as the input and output trays.
- Close the lid and reconnect the printer to the power supply.
- Restart the printer and check if the orange light persists.
2. Fixing Problems with Ink Cartridges
The flashing orange light on a Canon printer may be caused by a malfunctioning or improperly installed ink cartridge. To resolve the issue, follow these steps:
How to Examine Ink Cartridges
- Turn off the printer and unplug it.
- Open the printer lid to access the ink cartridges.
- Remove the ink cartridges and check for any visible damage.
- Use a lint-free cloth to gently clean the ink cartridge contacts.
- Reinsert the cartridges into their slots, ensuring they are seated securely.
- Turn on the printer, close the lid, and reconnect the power.
Substitute ink cartridge with a renewed one if delinquent continues.
3. Empty or Low Ink Levels
When the ink level is low or empty, it can cause the Canon printer’s orange light to flash frequently. Here’s what you can do:
How to Replace Cartridges and Check Ink Levels
- Open the Canon printer software on your computer or visit the ij.start.canon webpage.
- Check the ink levels in the ink settings or maintenance section.
- Replace the cartridges if the ink is low or empty.
- After replacing the cartridges, perform a test print to ensure the printer is functioning properly.
4. Paper Not Detected by Printer
If the printer fails to detect paper in the tray, the orange light may occasionally blink. Here’s how to fix it:
How to Resolve Paper Detection Problems
- Ensure that the paper is loaded correctly into the tray.
- Adjust the paper guides to fit the size of the paper.
- Remove any excess paper from the tray.
- Restart the printer and try printing again.
If the issue persists, clean the paper sensor or contact Canon support for further assistance.
5. Failure of Print Head Alignment
The flashing orange light on a Canon printer may also be caused by a misaligned print head.
To repair it, take these actions:
Procedure for Print Head Alignment
- Launch the Canon printer software on your computer.
- Go to the tools or maintenance section.
- Select the print head alignment option.
After the alignment procedure, check if the orange light issue has been resolved.
6. Problems with Overheating
Prolonged use of Canon printers can sometimes cause them to overheat, triggering the orange light. Here’s how to address this issue:
How to Address Overheating
- Unblock and turn off the printer.
- Give the printer at least half an hour to cool down.
- Try printing another time subsequently restarting it.
Ensure that the printer is placed in a well-ventilated area if overheating occurs frequently.
7. To fix hardware issues, reset the printer.
Resetting the printer may resolve the orange light issue caused by hardware problems if none of the previous solutions work.
Procedure for Canon Printer Resetting
- Switch the printer off.
- Press and hold the Stop/Reset button.
- Press and hold the button to reset the printer.
- Release the button after the printer turns on.
- Once the printer has initialized, check if the issue has been resolved.
Final thoughts
An orange light on a Canon printer can be frustrating, but identifying the cause usually makes it easy to fix. The step-by-step instructions provided will help you troubleshoot and resolve issues, whether they’re related to hardware, ink cartridges, or paper jams. With regular maintenance and the use of high-quality materials, you can prevent such problems and ensure your Canon printer runs smoothly. By following these tips and solutions, you can get your printer back to normal and continue printing without any issues.