Canon Tr4522 Setup
The Canon TR4522 Setup is a compact, all-in-one printer designed for home or small business use. With features like wireless printing, scanning, and faxing, it’s a versatile choice for a variety of tasks. The setup process includes unpacking the TR4522, plugging it in, and installing paper and ink cartridges. The printer is compatible with both USB and Wi-Fi connections, making it easy to integrate with PCs and mobile devices. For streamlined wireless setup and print management, users can install the Canon PRINT app. Additionally, the TR4522 offers voice-activated printing and automatic duplex printing to enhance efficiency and user convenience.
Canon Tr4522 Manual Setup
To set up the Canon TR4522 manually, follow the steps below:
- Remove the printer from the box along with its accessories (manuals, power cable, and ink cartridges).
- Open the front cover, insert the included cartridges into the correct slots, and then close the lid.
- Adjust the guides in the rear paper tray and load it with plain paper.
- Connect the printer to the power source, then press the power button.
- Follow the on-screen prompts to select the language, date, and time.
- Use a USB cable or the Canon PRINT app to complete the setup.
- Install the software using the provided CD or download it from the ij.start.canon website.
- Print a test page to complete the Canon Pixma TR4522 setup.
Canon Tr4522 Setup WPS
Follow these steps to set up the Canon TR4522 using the WPS method:
- Ensure that your router has a WPS button.
- Press the Wi-Fi button on the printer to make the power light flash.
- Press and hold the WPS button on your router.
- Once connected, the printer’s Wi-Fi light will remain solid and stop flashing.
- Download the necessary software and drivers from Canon’s website.
- Print a test page to confirm the Canon TR4522 Wi-Fi setup connection.
Canon Tr4522 Setup with App
- Download and install the Canon PRINT Inkjet/SELPHY app from your smartphone’s app store.
- Ensure that the printer is turned on and ready to use.
- Press and hold the Direct button to enable ‘Easy Wireless Connect’ after pressing the printer’s Wi-Fi button until the Wi-Fi light starts flashing.
- Open the app, select ‘Add Printer,’ and follow the on-screen instructions to locate your TR4522 on the network.
- Once the printer is detected, select your network and enter the password to connect it to Wi-Fi.
- Send a test print job from the app to confirm the setup.
Canon Tr4522 Setup Issues and Troubleshooting
If you experience connection issues, ensure that the router and printer are close to each other.
Turn the printer and router back on:
- Ensure that the printer is in Easy Wireless Connect mode if the app is having trouble detecting it.
- Ensure that the printer and mobile device are connected to the same wireless network.
Paper Jams:
- Be careful not to tear the paper when removing it from a jam.
- Check the paper tray for any obstructions.
Problems with Ink Cartridges:
- Replace the cartridges carefully.
- Verify compatibility.
Installation failure:
- Reinstall the Canon software if the driver installation fails.
- Ensure that the drivers are compatible with the operating system.
Canon Tr4522 Firmware Update
- To check the firmware version, go to the printer’s settings.
- Download the latest firmware by visiting ij.start.canon.
- Connect the printer to the computer using a USB cable, then launch the firmware update utility.
- Go to settings, open the printer’s menu, and check for updates.
- Do not disconnect or turn off the printer during the update process.
Canon Tr4522 reset
Soft reset:
- Before resuming, turn off the printer and disconnect it for a few minutes.
Resetting Network Settings:
- Navigate to the printer’s settings menu.
- Select ‘Setup’ > ‘Device Settings’ > ‘Reset Settings’ > ‘LAN Settings.’
Factory reset:
- Go to the settings menu and select ‘Factory Reset.’
- Select ‘Device Settings’ > ‘Reset Settings’ > ‘All Data.’
- Verify the reset.
Precautions:
- Before performing a reset, back up important settings and note your Wi-Fi passwords.
Canon Tr4522 Setup advance tips
Follow these tips for an effective Canon TR4522 setup:
Canon ts3400 Reset
- For a better connection, place the printer close to the Wi-Fi router.
- For better compatibility, use the 2.4 GHz band instead of the 5 GHz band.
- During setup, manually enter the network name if you’re using a hidden SSID.
WPS Configuration:
- Press and hold the printer’s Wi-Fi button until it starts connecting, then press the WPS button on your router if it supports WPS.
- This method eliminates the need to enter the password manually.
Configure Apple AirPrint or Google Cloud Print:
- Enable these features in the printer settings to ensure smooth cloud-based or iOS printing.
Make use of a static IP address:
- Assign a static IP address to the printer through your router’s settings to prevent IP conflicts and ensure a more reliable network connection.
Drivers for advanced printers:
- Install the full Canon driver package to access enhanced features, including high-resolution scanning and customizable print settings.
Use the features of the Canon PRINT app:
- The app allows you to scan documents directly to your phone, clean print heads, and monitor ink levels.
- Enable notifications for low ink levels or firmware updates.
Turn Duplex Printing on:
- Enable automatic two-sided printing from the settings menu to save money and paper.
Protect Your Connection:
- Change the default printer admin password to enhance network security and prevent unauthorized access.
Configure Power-Saving Settings:
- Adjust the printer’s sleep and power-off times in the settings to save energy.
Logs for troubleshooting:
- Access printer status reports and error logs from the settings menu to diagnose and resolve persistent issues.