Canon PIXMA MG3620 Setup
The Canon PIXMA MG3620 setup is straightforward. Start by unpacking the printer and connecting it to a power source. Download the Canon PRINT app or visit the Canon website to obtain the necessary drivers. Follow the on-screen instructions to complete the installation. If using Wi-Fi, press and hold the printer’s Wi-Fi button until the power light flashes. Next, connect your device to the same Wi-Fi network. Insert the ink cartridges and load paper. To confirm everything is set up correctly, try printing or scanning. The printer can print wirelessly from smartphones and laptops.
Canon MG3620 Manual Setup
- Unbox the printer and remove all packaging materials, including the protective tapes.
- Plug in the printer and press the power button to turn it on.
- Open the front panel of the printer to access the cartridge compartment.
- The cartridge holder will move to the center position.
- Insert the ink cartridges into the correct slots.
- Place the black cartridge on the right side.
- Place the color cartridge on the left side.
8. Press down on the cartridges until they snap into place.
9. Pull out the paper tray and load it with paper of the correct size.
10. Adjust the paper guides to hold the paper in place without bending it.
11. Visit the official Canon website at ij.start.canon.
12. Download the necessary drivers and software.
13. Connect the printer to your Wi-Fi network.
14. Print a test page to confirm a successful connection and proper configuration.
PIXMA MG3620 Setup WPS
To set up your Canon PIXMA MG3620 using WPS:
- Ensure the printer is turned on and connected to Wi-Fi.
- Press the printer’s ‘Wi-Fi’ button until the indicator light flashes. Then, press the ‘WPS’ button.
- Press the WPS button. The printer will attempt to connect to the network.
- Once the connection is successful, the printer’s Wi-Fi light will stop flashing and remain steady.
- To complete the Canon PIXMA MG3620 Wi-Fi setup, visit Canon’s website to download and install the printer software.
Canon PIXMA MG3620 Setup with App
For Canon PIXMA MG3620 wireless setup using the app, follow these steps:
- Download the Canon PRINT Inkjet/SELPHY app.
- Ensure the printer and your device are connected to the same network.
- Turn on the PIXMA MG3620 and ensure it is in Wi-Fi mode.
- Open the Canon PRINT app.
- Select “Add Printer” and follow the on-screen instructions to connect the printer to the network.
- Once connected, you can start printing directly from the app.
Canon PIXMA MG3620 Setup issues and resolutions
Setting up the Canon PIXMA MG3620 can sometimes be challenging, but here are some common issues and solutions to assist you:
1. Printer Not Connecting to Wi-Fi
Solution:
- The printer must be within the router’s range.
- Ensure that you’ve selected the correct Wi-Fi network and entered the correct password.
- Restart both the router and the printer.
- To reconnect to Wi-Fi, go to the printer’s control panel and select the Wireless LAN setup option in the Settings menu.
2. Driver Installation Issues
Solution:
- Visit the Canon website to download the latest drivers for your operating system.
- Ensure your operating system is up to date.Temporarily disable antivirus software during installation, as it may interfere with the process.
3. Printer is not recognized by the computer.
Solution:
- When using a wired connection, ensure the USB cable is securely connected.
- Try using a different USB port.
- Restart both your computer and printer.
- If you’re using a wireless connection, make sure both devices are connected to the same network.
4. Paper Jams
Solution:
- Carefully remove any paper jams by opening the printer lid.
- The paper size and type must be correct.
- Do not overfill the paper tray.
5. Ink Cartridge Issues
Solution:
- Remove and replace the ink cartridges, ensuring they are installed correctly.
- Check for any protective tape on new cartridges and remove it.
- Replace any empty or expired cartridges with new ones.
6. Print quality issues.
Solution:
- Use the printer’s cleaning tool available through the control panel or software.
- Check and adjust the print head position if necessary.
- Ensure the correct type of paper is used for printing.
7. Error messages.
Solution:
- Refer to the printer manual or Canon’s support page for specific error codes.
- Follow the troubleshooting steps provided for the specific issue.
Canon PIXMA MG3620 Firmware Update
To update the firmware of your Canon PIXMA MG3620, follow these steps:
- Ensure that your printer is connected to the same network.
- Print a status page from the printer’s control panel to check the current firmware version.
- Visit the Canon website and download the latest firmware update for the MG3620.
- Open the downloaded file on your device.
- Wait for the update to complete, then ensure the printer restarts. Verify the firmware version to confirm that the update was successful.
Canon PIXMA MG3620 Reset
To reset your Canon PIXMA MG3620, follow these steps:
- If the printer is off, turn it on.
- Press the Home button on the printer control panel to access the menu.
- Use the arrow buttons to select Canon PIXMA MG3620 Setup (represented by a wrench icon), then press OK.
- Scroll to Device Settings and then select Reset Settings.
- To restore the printer to its factory defaults, select Reset All Settings.
- Follow the on-screen prompts to confirm and complete the reset. The printer will restart with the default settings.